We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
SCHNEIDER Electric - TeSys Deca contactor, 3P (3 NO), AC-3/AC-3e, <= 440V, 50A, 230V AC, 50/60 Hz coil
Lei 590.00
Lei 495.80
In stock
SKU
LC1D50AP7
Free shipping for orders over 500 lei
Free shipping applies to cities without additional kilometers or heavy/high volume products
Write Your Own Review
| Manufacturer | SCHNEIDER Electric |
|---|---|
| Manufacturer code | LC1D50AP7 |
| Order Unit | Pce |
| Range | TeSys; TeSys Deca |
| Product Name | TeSys D; TeSys Deca |
| Product or component type | Contactor |
| Device short name | LC1D |
| Contactor application | Motor control; Resistive load |
| Utilisation category | AC-4 |
| Power pole contact composition | 3 NO |
| Poles description | 3P |
| [uc] Control Circuit Voltage | 230 V AC 50/60 Hz |
| [Ue] rated operational voltage | Power circuit: <= 690 V AC 25...400 Hz; Power circuit: <= 300 V DC |
| [Ie] rated operational current | 50 A (at <60 °C) at <= 440 V AC AC-3 for power circuit |
| Motor power kW | 15 kW at 220...230 V AC 50/60 Hz (AC-3) |
| Motor power HP (UL / CSA) | 3 hp at 115 V AC 50/60 Hz for 1 phase motors |
| Control circuit type | AC at 50/60 Hz |
| Product Weight | 0.855 kg |
| Average impedance | 1.5 mOhm - Ith 80 A 50 Hz for power circuit |
| [Ui] Rated insulation voltage | Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified |
| [Uimp] Rated impulse withstand voltage | 6 kV conforming to IEC 60947 |
| Power dissipation per pole | 3.7 W AC-3; 9.6 W AC-1; 3.7 W AC-3e |
| Front cover | With |
| Mounting support | Plate; Rail |
| Auxiliary contact composition | 1 NO + 1 NC |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit; 80 A (at 60 °C) for power circuit |
| Mechanical durability | 6 Mcycles |
| Electrical durability | 1.45 Mcycles 50 A AC-3 at Ue <= 440 V 1.1; Mcycles 80 A AC-1 at Ue <= 440 V 1.45; Mcycles 50 A AC-3e at Ue <= 440 V |
| Connections - terminals | Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end |
| Tightening torque | Control circuit: 1.7 N.m - on EverLink BTR screw connectors - with screwdriver flat Ø 6 mm; Control circuit: 1.7 N.m - on EverLink BTR screw connectors - with screwdriver Philips No 2 |
| Operating time | 4...19 ms opening |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 |
| Standards | CSA C22.2 No 14 |
| Product certifications | GL |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 |
| Rated breaking capacity | 900 A at 440 V for power circuit conforming to IEC 60947 |
| Pollution degree | 3 |
| Operating altitude | 0...3000 m |
| Ambient air temperature for storage | -60…80 °C |
| Ambient air temperature for operation | -40…60 °C; 60…70 °C with derating |
| Minimum switching current | 5 mA for signalling circuit |
| Minimum switching voltage | 17 V for signalling circuit |
| Height | 122 mm |
| Width | 55 mm |
| Depth | 120 mm |
| Associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 |
| Protective treatment | TH conforming to IEC 60068-2-30 |
| IP degree of protection | IP20 front face conforming to IEC 60529 |
| Mechanical robustness | Vibrations contactor open: 2 Gn, 5...300 Hz; Vibrations contactor closed: 4 Gn, 5...300 Hz; Shocks contactor closed: 15 Gn for 11 ms; Shocks contactor open: 10 Gn for 11 ms |
| Maximum operating rate | 3600 cyc/h 60 °C |
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | 0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz |
| Inrush power in VA | 140 VA 60 Hz cos phi 0.75 (at 20 °C) |
| Hold-in power consumption in VA | 13 VA 60 Hz cos phi 0.3 (at 20 °C) |
| Heat dissipation | 4…5 W at 50/60 Hz |
| Auxiliary contacts type | Type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 |
| Signalling circuit frequency | 25...400 Hz |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contact |
| Overvoltage Category | CAT III |
We found other products you might like!
-
SCHNEIDER Electric - TeSys D contactor 3P 9A AC-3 440V, aux 1NO+1NC, 24V 50HzLei 88.00 Lei 73.95 -
SCHNEIDER Electric - TeSys Deca contactor, 3P (3 NO), AC-3, <= 440V, 150 A, 220V AC, 50/60 Hz coilLei 1,959.00 Lei 1,646.22 -
SCHNEIDER Electric - TeSys D contactor, 3P, 18A, AC-3 440V, aux 1NO+1NC, 24V, 50HzLei 135.00 Lei 113.45 -
SCHNEIDER Electric - TeSys D contactor, 3P, 18A, AC-3 440V, aux 1NO+1NC, 230V, 50HzLei 135.00 Lei 113.45 -
SCHNEIDER Electric - TeSys D contactor, 3P, 25A, AC-3 440V, aux 1NO+1NC, 24V, 50HzLei 183.00 Lei 153.78 -
SCHNEIDER Electric - TeSys D contactor, 3P, 25A, AC-3 440V, aux 1NO+1NC, 230V, 50HzLei 183.00 Lei 153.78 -
SCHNEIDER Electric - TeSys D contactor, 3P, 32A, AC-3 440V, aux 1NO+1NC, 24V, 50HzLei 257.00 Lei 215.97 -
SCHNEIDER Electric - TeSys D contactor, 3P, 32A, AC-3 440V - aux. 1NO+1NC, 48V, 50HzLei 262.00 Lei 220.17 -
SCHNEIDER Electric - TeSys D contactor, 3P, 32A, AC-3 440V, aux 1NO+1NC, 230V, 50HzLei 257.00 Lei 215.97 -
SCHNEIDER Electric - TeSys D contactor, 3P, 38A, AC-3 440V, aux 1NO+1NC, 230V, 50HzLei 317.00 Lei 266.39 -
SCHNEIDER Electric - TeSys D contactor, 3P, 80A, AC-3 440V, aux 1NO+1NC, 230V, 50HzLei 731.00 Lei 614.29
