We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
WIELAND - 8100065200 - SWITCHED-MODE POWER SUPPLY WIPOS PS1 24-2.5
Lei 359.00
Lei 296.69
In stock
SKU
8100065200
Free shipping for orders over 1000 lei
Free shipping applies to cities without additional kilometers or heavy/high volume products
wipos PS1 switched-mode power supply, nominal voltage: 24 V DC / 2,5 A (setting range 21,6-27,6 V DC), sustained short-circuit protection, input voltage range: 85-264 V AC / 90-350V DC, single phase, W x H x D: 32 × 90 × 110 mm
Technical data
| EAN | 4049088269646 |
|---|---|
| country of origin | CN |
| customs tariff number | 85044083 |
| net weight single part | 252 g |
| connection type | screw connection |
| number of phases | single phase power supply |
| suitable for modular version | no |
| mounting type, other | no |
| mounting type, wall mounting | no |
| rail mounting possible | yes |
| housing material | Polycarbonate (PC) |
| operating temperature min. | -40 °C |
| operating temperature max. | 70 °C |
| relative humidity min. | 0 % |
| relative humidity max. | 95 % |
| storage temperature / transport min. | 85 °C |
| storage temperature / transport max. | -40 °C |
| degree of protection (IP) | IP20 |
| protection class | I |
| pollution degree | 2 |
| series Connection possible | yes |
| number of series switchable device | 2 |
| parallel-service possible | yes |
| number of parallel switchable device | 2 |
| function display | "DC OK" (LED green) (U(o) 17.6...19.4V) |
| two-Phase use | 85...264V AC: a fuse or a protective switch must be connected to the N-terminal. |
| temperature coefficient | ±0.05%/K |
| ripple and noise | < 0.05 V |
| hold time 115V AC | > 25 ms |
| hold time 230V AC | > 129 ms |
| isolating voltage Output DC | 4242 V |
| cohesive resistance (In-/Output) | 100 MOhm |
| derating | A. 60 °C ... 70 °C: 2.5 %/KB. 40 °C ... 70 °C: 1.67 %/K |
| cooling | free convection |
| MTBF | 590,000h |
| connector cross section (input | 0.35-4 mm²/0.25-2.5mm² (AWG22 - 12/AWG22-14) |
| connector cross section (output) | 0.5-4 mm²/0.5-2.5 mm² (AWG22 - 12/AWG22 - 14) |
| connector cross section PE | min. 2.5mm² (AWG14) |
| wire strip length | 8 mm |
| permissible torque min. | 0.5 Nm |
| permissible torque max. | 0.6 Nm |
| control "Adj" | trimming potentiometer for fine-tuning of U(out) |
| number of + | 2 |
| number of - | 3 |
| further terminals | L1, N, PE |
| type of output voltage | DC |
| power output | 60 W |
| output voltage stabilized | yes |
| output voltage | 24 V |
| min. output voltage | 21.6 V |
| max. output voltage | 27.6 V |
| Over voltage proctection (OVP) | ≤ 33 V |
| output current | 2.5 A |
| input voltage DC min. | 90 V |
| input voltage DC max. | 350 V |
| input voltage AC min. | 85 V |
| input voltage AC max. | 264 V |
| rated frequency min. | 47 Hz |
| rated frequency max. | 450 Hz |
| input fuse | 6.3A / 250V (internal) |
| depth | 110 mm |
| width | 32 mm |
| height | 90 mm |
| mounting distance horizontal | 20 mm |
| mounting distance vertical | 75 mm |
| weight | 260 g |
| ECLASS 8.1 | 27049002 |
| ETIM 9.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 6.0 | EC002540 |
| ETIM 5.0 | EC002540 |
| ROHS conformity status | compliant/exempted |
| ROHS exceptions | III-6(c) |
| REACH-SVHC conformity status | Duty-To-Declare |
| REACH-SVHC substances | Lead |
| REACH-SVHC CAS numbers | 7439-92-1 |
Write Your Own Review
| Manufacturer | WIELAND |
|---|
