TESTBOY - TV900 - Charging station test adapter

More and more charging stations for electric cars are being installed across Europe. Testboy has developed the TV 900 measuring adapter, in order to be able to test the Type 2 charging stations standardized in Europe. The TV 900 takes over and simulates the communication with the charging station and electric vehicle. An installation tester or multimeter can be connected via the 4 mm banana socket. Thus a test with a VDE 0100 tester is possible, such as the Testboy device TV 455. The built-in LEDs indicate whether and how many phases are present. One of the three phases can be connected to the built-in Schuko socket. This allows each phase to be tested individually.

BENEFITS

• Suitable for wallboxes with / without cable
• Connection option for installation tester or multimeter
• Direct phase check via LED display
• Built-in Schuko socket with phase changeover

SPECIFICATIONS

Indication: Optical, with LEDs

Input voltage: 230 V / 400 V (1-phase / 3-phase)

Operating frecuency: 50 / 60 Hz

Proximity Pilot (PP): Yes

Simulation of the charging cable: NC, 13 A, 20 A, 32 A, 63 A

Control Pilot (CP): Yes

Simulation of the vehicle state:

A (not connected)

B (connected and ready)

C (connected and charging)

D (connected and charching with ventilation)

CP-Error Simulation: E (communication error)

PE-Error Simulation: Protective conductor interrupted

Phase indication: Yes, via the LEDs L1 / L2 / L3

Wallbox-Type: With and without cable

Charging plug: Type 2

Banana sockets: 4 mm sockets for 3-Phase test equipments (Installation Tester), Multimeter

Schuko-Socket: For checking with Schuko testing cable

BNC-Socket: For use of an oscilloscope

Overvoltage category: CAT III 400 V

Standard: IEC / EN 61010-1 (DIN VDE 0411)

Documents & Downloads:

Data sheet