We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
SCHNEIDER Electric - TeSys K contactor, 3P, 12A, AC-3, <= 440V, aux 1NO, coil 24V, 50Hz
| Manufacturer | SCHNEIDER Electric |
|---|---|
| Manufacturer code | LC1K1210B5 |
| Order Unit | Pce |
| Range | TeSys |
| Product Name | TeSys K |
| Product or component type | Contactor |
| Device short name | LC1K |
| Contactor application | Motor control; Resistive load |
| Utilisation category | AC-1 |
| Power pole contact composition | 3 NO |
| Device application | Control |
| Poles description | 3P |
| [uc] Control Circuit Voltage | 24 V AC 50 Hz |
| [Ue] rated operational voltage | Power circuit: 690 V AC 50 Hz; Signalling circuit: 690 V AC 50 Hz |
| [Ie] rated operational current | 12 A at <= 440 V AC AC-3 for power circuit |
| Motor power kW | 3 kW at 220...230 V AC 50 Hz AC-3 |
| Control circuit type | AC at 50 Hz |
| Product Weight | 0.18 kg |
| Average impedance | 3 mOhm - Ith 20 A 50 Hz for power circuit |
| [Ui] Rated insulation voltage | Power circuit: 690 V conforming to IEC 60947-4-1; Power circuit: 600 V conforming to UL 60947-4;-1 Power circuit: 600 V conforming to CSA C22.2 No 60947-4-1 |
| [Uimp] Rated impulse withstand voltage | 8 kV |
| Mounting support | Rail; Plate |
| Auxiliary contact composition | 1 NO |
| [Ith] conventional free air thermal current | 20 A (at 50 °C) for power circuit; 10 A (at 50 °C) for signalling circuit |
| Mechanical durability | 10 Mcycles |
| Electrical durability | 1.3 Mcycles 12 A AC-3 at Ue <= 440 V; 0.3 Mcycles 20 A AC-1 at Ue <= 440 V |
| Connections - terminals | Screw clamp terminals 1 cable(s) 1.5…4 mm²solid |
| Tightening torque | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2; 1.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm; 1.3 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 |
| Operating time | 10...20 ms coil de-energisation and NO opening |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 |
| Standards | IEC 60947-4-1 |
| Product certifications | UL |
| Irms rated making capacity | 110 A AC for signalling circuit conforming to IEC 60947 |
| Rated breaking capacity | 110 A at 440 V conforming to IEC 60947; 80 A at 500 V conforming to IEC 60947; 70 A at 660...690 V conforming to IEC 60947 |
| Operating altitude | 2000 m without derating |
| Ambient air temperature for storage | -50…80 °C |
| Minimum switching current | 5 mA for signalling circuit |
| Minimum switching voltage | 17 V for signalling circuit |
| Height | 58 mm |
| Width | 45 mm |
| Depth | 57 mm |
| Associated fuse rating | 25 A gG at <= 440 V for power circuit |
| Protective treatment | TC conforming to IEC 60068; TC conforming to DIN 50016 |
| IP degree of protection | IP20 conforming to VDE 0106 |
| Flame retardance | V1 conforming to UL 94; Requirement 2 conforming to NF F 16-101; Requirement 2 conforming to NF F 16-102 |
| Mechanical robustness | Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6; Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Maximum operating rate | 3600 cyc/h |
| Control circuit voltage limits | Operational: 0.8...1.15 Uc (at <50 °C) |
| Inrush power in VA | 30 VA (at 20 °C) |
| Hold-in power consumption in VA | 4.5 VA (at 20 °C) |
| Heat dissipation | 1.3 W |
| Auxiliary contacts type | Type instantaneous 1 NO |
| Signalling circuit frequency | <= 400 Hz |
| Non Overlap Distance | 0.5 mm |
| Overvoltage Category | CAT III |
-
SCHNEIDER Electric - TeSys K contactor, 3P, 16A, AC-3, <= 440V, aux 1NC, coil 230V, 50HzLei 155.00 Lei 128.10 -
SCHNEIDER Electric - TeSys K contactor, 3P, AC-3, <= 440V, 12A , 1 NO aux, 24V DC coilLei 158.00 Lei 130.58









