BERNSTEIN, MINI TORQUE SCREWDRIVER 0.05-0.6 NM WITH ADAPTER 1/4 INCH (6.35 MM) TO 4 MM BITS

• Manufacturer recommendations see technical description
• Torque shank 1/4 inch (6.35 mm)
  0.05-0.6 Nm (5-60 cNm ) Tolerance (+/-6%)
• Shank length 15 mm, Ø 10 mm
• Torque easily adjustable with a knurled screw, Lock function and click sound
• supplied with a bit adapter 1/4 inch to 4 mm (5/32 inch)
• PERFECTLY SUITABLE TO USE our precision mechanics bit set article 6-340-3
• Supplied in a sturdy plastic quadrobox

AREA OF APPLICATION

The torque screwdriver has a 1/4 inch (6.3 mm) hexagon socket bit receptacle with a clamping ball. The adjustable torque of 0.05 to 0.6 Nm can be set to the required size via a knurled screw, tolerance (+/-6%). The set value can then be locked. The torque screwdriver has a complete length of 105 mm. Useful accessories are an extension (110 mm) and a bit - adapter from 1/4 inch (6.3 mm) mm to 4 mm (5/32 inch) bits.

TECHNICAL DESCRIPTION

When the set torque is reached, there should be an audible click and a click should be felt. If this is not the case, please readjust the small screw on the screwdriver a little so that the screwdriver clicks audibly.
IMPORTANT NOTE: If the torque screwdriver is not used, please return it to the starting position (0 Nm). This will relieve the preload and prevent premature wear.
Each torque screwdriver is unit tested and certified to DIN ISO 6789 and ASME B107.300-2010 torque standards (certificate included with product).
CARE AND MAINTENANCE The torque screwdriver is a precision instrument. To ensure tolerance, calibration must be performed regularly and is the responsibility of the owner. The recommended calibration interval is every 12 months, and may be shorter depending on the application. The product oiled by the manufacturer for lifetime use and should not be oiled additionally. Please do not throw it, or use it with a hammer, this is a precision measuring device. At best, always place back in the box after use to keep dirt and wetness away. Never disassemble the torque screwdriver yourself. If you need to repair the torque screwdriver, please contact a qualified service station. An improper repair attempt may result in damage to this instrument and it will no longer meet the accuracy requirements of DIN ISO 6789 and ASME 8107.300-2010.