BERNSTEIN, FEELER GAUGE 21 BLADES

• measuring range of 0.05 - 2.0 mm
• 0.05 - 0.1 - 0.2 - 0.3 - 0.4 - 0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1.0 - 1.1 - 1. 2 - 1.3 - 1.4 - 1.5 - 1.6 - 1.7 - 1.8 - 1.9 - 2.0
• figures in mm and inches
• tolerance according to T2 (see content)
• cover sheet nickel plated with locking screw

AREA OF APPLICATION

With the feeler gauges gap measurements can be measured, it consists of a set (compartments) of hardened metal strips with different strength. Testing and measuring equipment are the most important tools and belong on every workbench or in every tool case. Sensor gauges are used where measuring with calipers or gauges is not possible or cumbersome, often when adjusting electrical contact switches.

T2 TOLERANCES table, see below!
You should pay attention to the following errors during measurement in order to obtain a correct measurement result. Keep the feeler gauge as well as the part to be measured calm and straight, do not tilt it. At best you have a constant reference temperature of 20 degrees Celsius, strong temperature fluctuations change the measurement results. Please check your feeler gauge regularly for damage, quirks, indentations and remove soiling immediately.

T2 TOLERANCES

• Nominal thickness 0.05 +/- 0.004 mm
• Nominal thickness 0.10 +/- 0.005 mm
• Nominal thickness 0.20 +/- 0.008 mm
• Nominal thickness 0.30 +/- 0.009 mm
• Nominal thickness 0.40 +/- 0.012 mm
• Nominal thickness 0.50 +/- 0.014 mm
• Nominal thickness 0.60 +/- 0.014 mm
• Nominal thickness 0.70 +/- 0.017 mm
• Nominal thickness 0.80 +/- 0.019 mm
• Nominal thickness 0.90 +/- 0.022 mm
• Nominal thickness 1.00 +/- 0.024 mm
• Nominal thickness 1.10 +/- 0.024 mm
• Nominal thickness 1.20 +/- 0.024 mm
• Nominal thickness 1.30 +/- 0.028 mm
• Nominal thickness 1.40 +/- 0.028 mm
• Nominal thickness 1.50 +/- 0.028 mm
• Nominal thickness 1.60 +/- 0.033 mm
• Nominal thickness 1.70 +/- 0.033 mm
• Nominal thickness 1.80 +/- 0.033 mm
• Nominal thickness 1.90 +/- 0.035 mm
• Nominal thickness 2.00 +/- 0.035 mm