BERNSTEIN, ESD handling set 5 pcs, mat (500x400x0,5) bracelet, 2 cable clamp

• content: article listing see below
• foldable workplace pad 500 x 400 x 0.5 mm
• black, dissipative 10^8 ohm (surface resistance to DIN IEC 61340-4-1)
• mat with 2x 10 mm press buttons
• adjustable elastic wristband with woven in silver-plated synthetic fibers, allergy-free.
• Meets the safety requirements for wrist grounding according to BGFE.
• spiral cable 2.4 m highly elastic
• earthing cable 1.5 m with 2 press buttons
• for connection to a grounding plug

AREA OF APPLICATION

Wrist grounding, as a safe method to derive electrostatic charge from people, consists of an adjustable wrist strap with woven silver-plated plastic fibers (close skin contact necessary) and a spiral cable, which connects the wristband with the earthing point via press buttons, electrically dissipative. The coiled cable has a safety resistance of 1 MOhm on each connection side and is approved for workplaces with a rated voltage up to 250 VAC. To ensure adequate insulation, the bracelet may only be stored in a dry place. Washing instructions for the bracelet: machine wash up to 30 ° C with soft washing powder, drying at low temperature (warm not hot), do not bleach! Avoid contact with acidic / alkaline solvents. ESD protection is retained for about 30 washing process.

TECHNICAL DESCRIPTION

Antistatic mat surface resistance <1 x 10^8 ohm (DIN 54345-1, DIN 53482), extremely tear-resistant, cold resistance -10 ° C (DIN EN 1876-1), heat resistance +70 ° C, flammability hardly inflammable (according to LOBA regulation , NFP 92507: M2), abrasion resistant, antimicrobial

GENERAL INFORMATION

EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone).